Z3x samsung tool v16.0 download serial#

Connect USB cable from phone to USB port on Z3X Box also connect RJ-45 UART Cable to Z3X as you will need to switch during unlock (I used C3300K and S7070, both cables worked)Д§.

Z3x samsung tool v16.0 download serial#

Start Z3X Samsung Tool v16.0, selecting T599N, the port should be set to Z3X Box Serial Port.Д¦. Dial *#7284# set UART to PDA and USB to Modem, click Save and Reset, this will power off your phone and enable the settings you chose.ДҐ. Use Cydia Impactor, this will root your phone but keep in mind that you will not have a Super User app, Cydia Impactor only roots to let Z3X modify phone, just connect phone to usb port on computer and press start, Impactor will root phone.Д¤. Turn on Unknown Sources in the Security tabДЈ. First thing you should do is turn on USB debugging mode in Developer optionsДў. If you receive an error the phone will restart and you must enter PhoneUtil again and set the UART and USB options again.ДЎ. Keep in mind that if you do not have these setting right you will get Bypassing MSL: ERROR.

PhoneUtil options should be set UART to PDA and USB to Modem. You may notice that when you dial *#7284# to enter PhoneUtil that all options are blank. Samsung 2G Tool Update Added: - GT-S3600I full support (Read codes, Unlock, Imei repair) (first in the world) - SGH-T409 support. With a Z3X Box, a user can repair options on a device that may be.

what is happening here is that the UART Port is not configured properly. Z3X Box is a tool that allows the owner of a Samsung or LG phone to customize their device. The main issue I was having was that I would get an Error when trying to bypass MSL. *****Disclaimer, I am not a Pro at Z3X nor due I claim to be, these are the steps I used and I am only sharing my research to help others that may have similar issue*****